Giving your truck a classy look no longer has to be expensive, especially if you have a tonneau cover in place!
A tonneau cover not only adds to the look of your cover but also provides extreme security and protection on uneven roads and unpredicted weather conditions.
However, people often face problems regarding the tightness of a tonneau cover. We often encounter questions like how tight a tonneau cover should be and how to tighten a tonneau cover.
Through this article, we will be discussing different ways to tighten up your tonneau cover. Stick till the end to find out!
Why Does The Tightness of Tonneau cover Matter?
While installing a Tonneau, one must be extremely careful about the tightness of the Tonneau. At times, your Tonneau cap might get stained due to the temperature indifferences. This, in turn, results in loosening your tonneau cover.
Once the tonneau covers get loose, it starts to the flap, which slowly damages the tonneau cover and the chance of hampering the inside content. Moreover, your tonneau cover will make noises throughout your trip with the flap.
Now we have realized the damage that can be done because of a loose Tonneau cover, but what about a tight one? That has some problems associated with it as well. With a tight cover, you will find that the front of your cover will be raised. Although there wouldn’t be any noise like the former, the content of your cargo may remain unprotected from rain.
How Tight Should A Tonneau Cover Be?
Now here’s a tricky question right there for us. We would say it should be tight, so it doesn’t flap and is closely fitted to your cargo.
But do not make it extremely tight because you will have problems opening it then. You can use the methods suggested in this article and have the perfect tightness for your Tonneau cover.
Also Read:-
How To Keep Tonneau Cover From Freezing
BAKFlip MX4 vs G2 Tonneau Cover
How to Adjust Tonneau Cover Tightness?
If your Tonneau cover is soft, then it should always be tight to enhance our truck’s overall look. But, your Tonneau cover sometimes gets loose, considering the times it is used and the temperature it has to handle.
You might wonder how should a tonneau cover fit. In such cases, you can adjust the tightness of your cover to maintain the tightness. Here’s how you can do it!
1) Rubber Seals
You will need a rubber seal and an aluminum frame to tighten your tonneau cover. With the rubber seals, you can seal the covers and prevent them from flapping. One thing to note is that one needs to use the seal on every edge of your truck.
2) Clamps
A clamp is generally used to hold the tonneau cover down or put it, and you can keep your cover in place with a clamp. After setting the clamp, ensure you tighten it well, which will end the flapping. Ensure that you do not tighten the clamps more than required. This will lead to loose braces or broken braces.
3) Adjustable Tension
The key to tightness is maintaining the stability of the cover. While you can do it with a clamp, applying tension can be another way to keep the stability in check. You need to apply an adjustable tension that can be rolled in clock and anti-clockwise directions to keep the tonneau cover tight. One thing to remember is that you apply the same tension on both sides of the cover.
Cleaning and Testing
The last thing you need to put in place is the maintenance of your cover. To ensure the tightness of the cover, you have to clean it. You can wipe the cover using drop cloths or other cleaning treatments. Similarly, you must test your cover once in a while if you aren’t using the truck frequently.
Wrapping It Up:
There are several reasons for which a tonneau cover is desirable. Whether it is increasing the millage or avoiding the risk of damage, installing a tonneau cover can be your go-to solution for all. However, in order to ensure the long life of your tonneau cover, it’s extremely important to maintain it and adjust its tightness properly. With the appropriate tightness, you can have a noise-free ride any time and anywhere.
